Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
7. Brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
10.1. An interior
10.2. Seats
10.3. Glasses and mirrors
10.4. Elements of external furnish of a body
10.5. Bumpers
10.6. Doors
10.7. A roof
10.8. Seat belts
10.9. A forward part of a body
10.10. A back part of a body
10.11. A frame and a body skeleton
10.11.1. The design description
10.11.2. Check of geometry of a body
10.11.3. Insulators of the pallet of a floor
10.12. Restoration of tightness and elimination of scratches of a body
11. Schemes электроборудования
 









10-11-1-opisanie-konstrukcii.html

10.11.1. The design description

The body consists of the several parts connected among themselves, forming the whole parts of a forward and back frame. The bottom lever of a forward suspension bracket is fixed by bolts and will pull together with holders, at the left and on the right. Holders of the bottom lever of a forward suspension bracket are attached to the bottom part of a body by three bolts in two places. The engine is fixed by bolts to a forward frame. The eminence of a rack of a suspension bracket should be correct concerning the bottom part of a body for appropriate maintenance of an arrangement of a suspension bracket and adjusting angles of slope шкворней.
Separate parts of a body promote achievement of limiting durability of a body, therefore supervise welding in the course of performance of repair work.
If at carrying out of repair work factory consolidation or an anticorrosive covering collapses or damaged, on details of the bottom part of a body put an anticorrosive covering and consolidation. At drawing of an anticorrosive covering on a detail of the bottom part of a body apply anticorrosive chromium plating or something similar. Application of the combined means is not recommended.
The bottom casing of a transmission — the uniform steel element serving for protection of the bottom part of a transmission. This covering protects from hit of small stones, gravel or other subjects in a transmission in the conditions of normal driving.



To return back
10.11. A frame and a body skeleton
On the following page
10.11.2. Check of geometry of a body