Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
7. Brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
10.1. An interior
10.2. Seats
10.3. Glasses and mirrors
10.4. Elements of external furnish of a body
10.5. Bumpers
10.6. Doors
10.7. A roof
10.8. Seat belts
10.9. A forward part of a body
10.10. A back part of a body
10.11. A frame and a body skeleton
10.11.1. The design description
10.11.2. Check of geometry of a body
10.11.3. Insulators of the pallet of a floor
10.12. Restoration of tightness and elimination of scratches of a body
11. Schemes электроборудования
 









10-11-3-izolyatory-poddona-pola.html

10.11.3. Insulators of the pallet of a floor

Insulators of the pallet of a floor are designed for keeping of the big temperatures at use каталитических neutralizers in release system. Therefore at car service insulators which can be removed and reinstalled in initial sequence and an arrangement are necessary.
If it is necessary to replace an insulator, use only special insulators for an arrangement on the floor pallet.
Establish insulators in an initial arrangement and sequence.
Arrange closely parts of an insulator for avoidance of presence of backlashes and partial overlapping of parts the friend the friend.
At insulator replacement use only special isolation.
Use original parts of an insulator for definition of necessary quantity of a material for replacement and as the sample for installations of a new insulator on the floor pallet are sharp also.
At installation of isolation do not increase cuts and apertures for an attachment of parts of an interior: panels of tools or the floor console.
Arrange electroconducting of parts of an interior over insulators of the pallet of a floor.
Fix electroconducting in its original position.
Do not use шумопоглотители or glue of an upholstery over the floor pallet on the sites located over каталитическим neutralizer and the muffler.
At repair or replacement of isolation insulators should be the identical thickness, the identical sizes and are located in the original position on the car.



To return back
10.11.2. Check of geometry of a body
On the following page
10.12. Restoration of tightness and elimination of scratches of a body