Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
7. Brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
10.1. An interior
10.2. Seats
10.3. Glasses and mirrors
10.4. Elements of external furnish of a body
10.4.1. The design description
10.4.2. Removal and installation of elements of external furnish
10.5. Bumpers
10.6. Doors
10.7. A roof
10.8. Seat belts
10.9. A forward part of a body
10.10. A back part of a body
10.11. A frame and a body skeleton
10.12. Restoration of tightness and elimination of scratches of a body
11. Schemes электроборудования
 









10-4-2-snyatie-i-ustanovka-ehlementov-vneshnejj-otdelki.html

10.4.2. Removal and installation of elements of external furnish

Молдинг roofs
Removal

Fig. 10.50. Removal молдинга (1) roofs from plastic clips




Remove молдинг 1 (fig. 10.50) roofs from plastic clips.
Installation
Press молдинг roofs on plastic clips.
Overlay of a forward bumper
Removal
Open a cowl and fix it properly.
Disconnect a wire of "weight" from the storage battery.

Fig. 10.51. An arrangement of bolts (1) fastenings of an overlay (2) forward bumpers




Turn away bolts 1 (fig. 10.51) and remove an overlay 2 forward bumpers.
Remove turn indexes.
Installation
Establish turn indexes.
Establish an overlay of a forward bumper and fix bolts.
Connect "a weight" wire to the storage battery.
The handle of a door of a luggage carrier
Removal
Disconnect a wire of "weight" from the storage battery.
Open a luggage carrier door.
Remove the cylinder of the lock of a door of a luggage carrier.
Remove lamps of illumination of licence plate.

Fig. 10.52. An arrangement of screws (1) fastenings of the handle (2) doors of a luggage carrier




Turn away screws 1 (fig. 10.52) and remove the handle of 2 doors of a luggage carrier.
Installation
Establish the handle of a door of a luggage carrier and fix screws.
Establish lamps of illumination of licence plate.
Establish the cylinder of the lock of a door of a luggage carrier.
Connect "a weight" wire to the storage battery.



To return back
10.4.1. The design description
On the following page
10.5. Bumpers