> Removal and installation of bumpers and their elements. Daewoo Matiz (since 1997 of release)
Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
7. Brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
10.1. An interior
10.2. Seats
10.3. Glasses and mirrors
10.4. Elements of external furnish of a body
10.5. Bumpers
10.5.1. The design description
10.5.2. Removal and installation of bumpers and their elements
10.6. Doors
10.7. A roof
10.8. Seat belts
10.9. A forward part of a body
10.10. A back part of a body
10.11. A frame and a body skeleton
10.12. Restoration of tightness and elimination of scratches of a body
11. Schemes электроборудования
 









10-5-2-snyatie-i-ustanovka-bamperov-i-ikh-ehlementov.html

10.5.2. Removal and installation of bumpers and their elements

Facing of a forward bumper
Removal
Disconnect a wire of "weight" from the storage battery.
Lift the car and establish on support.
Remove forward wheels.

Fig. 10.54. An arrangement of screws (1) fastenings грязезащитных guards (2) arches of forward wheels




Turn out screws 1 (fig. 10.54), release clamps, remove грязезащитные guards of 2 arches of forward wheels.

Fig. 10.55. An arrangement of screws (1) fastenings of facing of a forward bumper




Turn away bolts 1 (fig. 10.55) from two parties of facing of a forward bumper.

Fig. 10.56. Removal of clips (1) under facing of a forward bumper




Remove clips 1 (fig. 10.56) under facing of a forward bumper.
Lower the car.
Remove an overlay of a forward bumper from a bumper.
Remove facing of a forward bumper in a following order:

Fig. 10.57. Fastening of facing of a forward bumper: 1 — the screw; 2 — clips; 3 — facing of a forward bumper




- Turn out bolts 1 (fig. 10.57);
- Remove clips 2;
- Remove facing of a forward bumper 3.
Remove forward antifog headlights.
Installation

The note
Contact of surfaces from different metals can lead to fast corrosion.

Establish forward antifog headlights and fix screws.
Establish facing of a forward bumper and fix the top part of facing by clips.
Screw bolts of fastening of the top part of facing.
Establish an overlay of a forward bumper.
Lift and fix the car.
Establish clips under facing of a forward bumper.
Screw bolts from both parties of facing.
Establish грязезащитные guards of arches of forward wheels and fix their screws and clamps.
Establish forward wheels.
Lower the car.
Connect "a weight" wire to the storage battery.
Skeleton of a forward bumper
Removal
Disconnect a wire of "weight" from the storage battery.
Remove facing of a forward bumper.
Remove a coupling clip of electroconducting from a skeleton of a forward bumper.

Fig. 10.58. An arrangement of nuts (1) fastenings of a skeleton (2) forward bumpers




Turn away a nut 1 (fig. 10.58) and remove a skeleton 2 forward bumpers.
Installation

The note
Contact of surfaces from different metals can lead to fast corrosion. Be convinced of application of appropriate inhalings in order to avoid premature corrosion.

Establish an arm of a forward bumper and fix nuts.
Establish a coupling clip of electroconducting on an arm of a forward bumper.
Establish facing of a forward bumper.
Connect "a weight" wire to the storage battery.
Facing of a back bumper
Removal
Lift and fix the car.

Fig. 10.59. An arrangement of bolts (1) under facing of a back bumper




Turn away bolts 1 (fig. 10.59) under facing of a back bumper.

Fig. 10.60. An arrangement of bolts of fastening of facing to an arm of a back bumper




Turn away bolts of fastening of facing to an arm of a back bumper (fig. 10.60).
Lower the car.
Remove facing of a back bumper in a following order:

Fig. 10.61. Fastening of facing of a back bumper: 1 — nuts; 2 — bolts; 3 — facing of a back bumper




- From a luggage compartment turn away a nut 1 (fig. 10.61);
- Turn away screws 2;
- Remove facing 3 back bumpers.
Installation
Establish facing of a back bumper in a following order:
- From a luggage compartment screw the top nuts 1 (fig. 10.61 see);
- Screw the top screws of 2 facings 3.
Lift and fix the car.
Screw the bottom bolts 1 (fig. 10.59 see) under facing of a back bumper.
Lower the car.
Arm of a back bumper
Removal
Lift and fix the car.

Fig. 10.62. An arrangement of bolts (1) fastenings of an arm (2) back bumpers




Turn out bolts 1 (fig. 10.62) and remove an arm of a back bumper.
Installation
Establish an arm of a back bumper and fix bolts.
Lower the car.



«To return back
10.5.1. The design description
On the following page»
10.6. Doors