Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
7. Brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
10.1. An interior
10.2. Seats
10.3. Glasses and mirrors
10.4. Elements of external furnish of a body
10.5. Bumpers
10.6. Doors
10.7. A roof
10.7.1. The design description
10.7.2. Removal and installation of elements of a roof
10.8. Seat belts
10.9. A forward part of a body
10.10. A back part of a body
10.11. A frame and a body skeleton
10.12. Restoration of tightness and elimination of scratches of a body
11. Schemes электроборудования
 









10-7-2-snyatie-i-ustanovka-ehlementov-kryshi.html

10.7.2. Removal and installation of elements of a roof

Roof upholstery
Removal
Disconnect a wire of "weight" from the storage battery.
Remove a sun-protection peak.
Remove a plafond of illumination of salon of the car.
Raise the panel of an upholstery of a forward rack.
Raise the panel of an upholstery of an average rack.
Raise the panel of an upholstery of a back rack.
Remove the handle for the passenger and a hook.
Separate an extreme sealant of a door of a luggage carrier.
Remove an internal upholstery of a roof in a following order:

Fig. 10.102. An arrangement of clips (1) fastenings of an internal upholstery (2) roofs




- Remove clips 1 (fig. 10.102);
- Remove an internal upholstery of 2 roofs.
Installation
Installation of an upholstery of a roof spend to sequences, return to removal.
Sun-protection peak
Removal

Fig. 10.103. An arrangement of screws (1) fastenings of a sun-protection peak (2)




Turn out screws 1 (fig. 10.103) and remove a sun-protection peak (2).
Installation
Establish a sun-protection peak and fix screws.
The handle for the passenger
Removal

Fig. 10.104. An arrangement of screws (1) fastenings of the handle for the passenger and a hook (2)




Turn out screws 1 (fig. 10.104), remove the handle for the passenger and a hook 2 from an internal upholstery of a roof.
Installation
Establish the handle for the passenger and a hook on an internal upholstery of a roof and fix screws.



To return back
10.7.1. The design description
On the following page
10.8. Seat belts