> Forward pillow of an engine mount. Daewoo Matiz (since 1997 of release)
Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
3.1. A mechanical part of the engine
3.1.1. The design description
3.1.2. Possible malfunctions of the engine and methods of their elimination
3.1.3. Diagnostics
3.1.4. The air filter in gathering
3.1.5. A hose and the ventilation valve картера
3.1.6. An inlet collector
3.1.7. A final collector
3.1.8. A gear belt
3.1.9. The oil pallet
3.1.10. The oil pump
3.1.11. A head of the block of cylinders
3.1.12. An engine mount pillow
3.1.13. A forward pillow of an engine mount
3.1.14. Removal and engine installation
3.1.15. Repair of a head of the block of cylinders
3.1.16. The block of cylinders, a cranked shaft, pistons and rods
3.2. Cooling system
3.3. An electric equipment
3.4. A control system of the engine
3.5. System of release of the fulfilled gases
4. Transmission
5. A running gear
6. A steering
7. Brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
11. Schemes электроборудования
 







3-1-13-perednyaya-podushka-podveski-dvigatelya.html

3.1.13. A forward pillow of an engine mount

Remove a final collector.
Remove the stabilizer of cross-section stability.

Fig. 3.34. An arrangement of bolts and nuts of fastening of the plug of a forward pillow from outside an arm (1) and from outside cross-beams (2)




Turn away a bolt and a nut 1 (fig. 3.34) fastenings of the plug of a forward pillow (from outside an arm).
Turn away bolts of 2 fastenings of the plug of a forward pillow (from outside cross-beams).

Fig. 3.35. An arrangement of bolts (1) fastenings of a forward arm from outside the block of cylinders




Turn away bolts 1 (fig. 3.35) fastenings of a forward arm (from outside the block of cylinders).
Remove the plug of a forward pillow and a forward arm.
Check up the pillow plug on absence of cracks, hardening or damages.
Installation spend to sequences, return to removal, taking into account the following.
Tighten bolts of a forward arm (from outside the block of cylinders) the moment 35—41 Нм.
Tighten a bolt of the plug of a forward pillow (from outside cross-beams) the moment 35—41 Нм.
Tighten bolts of the plug of a forward pillow (from outside cross-beams) the moment 45—55 Нм.
Tighten a bolt and a nut of the plug of a forward pillow (from outside an arm) the moment 68—83 Нм.



To return back
3.1.12. An engine mount pillow
On the following page
3.1.14. Removal and engine installation