3.3.11. Repair of the distributor of ignition

Fig. 3.148. Details of components of system of ignition and the ignition distributor: 1 — the ignition coil; 2 — spark plugs; 3 — a high-voltage wire; 4 — high-voltage wires; 5 — a basic clip; 6 — a fixing clip; 7 — the ignition distributor; 8 — муфта; 9 — an oil epiploon; 10 — the case of the distributor of ignition; 11 — an axis of the distributor of ignition; 12 — a clamp; 13 — the optical gauge; 14 — a plate; 15 — the plug; 16 — a disk with apertures; 17 — a cover; 18 — the screen; 19 — a rotor of the distributor of ignition; 20 — an epiploon of a cover of the distributor of ignition; 21 — a cover of the distributor of ignition

Details of components of system of ignition and the ignition distributor are shown on fig. 3.148.

Remove the ignition distributor.

Uncover, an epiploon and a rotor from the case of the distributor of ignition in a following order:

Fig. 3.149. Removal of a cover, an epiploon and a rotor from the case of the distributor of ignition: 1 — bolts; 2 — a cover of the distributor of ignition; 3 — an epiploon; 4 — a rotor

- Turn away bolts 1 (fig. 3.149);

- Uncover the distributor of ignition 2;

- Remove an epiploon 3;

- Remove a rotor 4.

Fig. 3.150. Places of check of a cover () and a rotor () on absence of damages/deteriorations or deposit traces (b)

Check up a cover and (fig. 3.150) on absence of damages/deteriorations or deposit traces b.

Check up a rotor on absence of damages or traces of a deposit with.

Remove a cover/screen from the case of the distributor of ignition in a following order:

Fig. 3.151. Removal of the screen (1) and an arrangement of bolts (2) fastenings of a cover (3)

- Remove the screen 1 (fig. 3.151);

- Turn out screws 2;

- Uncover 3.

Remove from the case of the distributor of ignition a fixing plate of the contactless gauge and an adapter in a following order:

Fig. 3.152. Removal from the case of the distributor of ignition of a fixing plate of the contactless gauge and an adapter: 1 — the screw; 2 — an adapter; 3 — a lining; 4 — a fixing plate; 5 — screws

- Turn out the screw 1 (fig. 3.152);

- Remove an adapter 2;

- Turn out screws 5;

- Remove a fixing plate 4;

- Remove a lining 3.

Remove the optical (contactless) gauge from the case of the distributor of ignition in a following order:

Fig. 3.153. Removal of the optical gauge from the case of the distributor of ignition: 1 — a disk with apertures; 2 — the plug; 3 — screws; 4 — a cutting disk; 5 — the optical gauge

- Cautiously remove a disk with apertures 1 (fig. 3.153);

- Remove the plug 2;

- Turn out screws 3;

- Remove a cutting disk 4;

- Remove the optical gauge 5.

Fig. 3.154. An arrangement of screws (1) fastenings of a clamp (2) bearings

Turn out screws 1 (fig. 3.154) and remove a clamp 2 bearings from the case of the distributor of ignition.

Remove муфту, an axis and the bearing from the case of the distributor of ignition in a following order:

Fig. 3.155. Removal муфты (1), axes (2) and the bearing (3) from the case of the distributor of ignition

- Remove муфту 1 (fig. 3.155);

- Using a press, remove an axis 2;

- Remove the bearing 3.

Assemblage of the distributor of ignition spend to sequences, return to removal.