> Starter. Daewoo Matiz (since 1997 of release)
Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
3.1. A mechanical part of the engine
3.2. Cooling system
3.3. An electric equipment
3.3.1. The design description
3.3.2. A starter
3.3.3. Possible malfunctions of an electric part of the engine and methods of their elimination
3.3.4. The generator
3.3.5. The storage battery
3.3.6. The ignition distributor
3.3.7. The ignition coil
3.3.8. Starter check
3.3.9. Repair and check of the generator of type And (MANDO)
3.3.10. Repair and check of the generator of type In (DAC)
3.3.11. Repair of the distributor of ignition
3.4. A control system of the engine
3.5. System of release of the fulfilled gases
4. Transmission
5. A running gear
6. A steering
7. Brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
11. Schemes электроборудования
 







3-3-2-starter.html

3.3.2. A starter

Removal
Disconnect a wire of "weight" from the storage battery.
Disconnect electric sockets and clips from a starter in a following order:

Fig. 3.97. Elements of fastening of wires of a starter: 1 — a grounding bolt; 2 — a nut of the traction relay of a starter; 3 — a bolt of fastening of a clip of wires; 4 — a grounding bolt




- Turn out a bolt of grounding 1 (fig. 3.97);
- Turn away a nut of the traction relay of a starter for a detachment of an electric wire 2;
- Turn out a bolt of fastening of a clip of wires 3;
- Turn out a bolt of grounding 4.

Fig. 3.98. An arrangement of bolts (1) fastenings and a direction of removal of a starter (2)




Turn out bolts of fastening of a starter 1 (fig. 3.98).
Remove a starter 2 in gathering.
Installation
Starter installation spend to sequences, return to removal, taking into account the following.
Tighten bolts of fastening of a starter the moment 55—65 Нм.
Tighten a nut of the traction relay the moment 9—12 Нм.
Tighten a bolt of fastening of a clip of a wire the moment 9—12 Нм.
Tighten a bolt of grounding by the moment 35—41 Нм.




To return back
3.3.1. The design description
On the following page
3.3.3. Possible malfunctions of an electric part of the engine and methods of their elimination