3.3.6. The ignition distributor

Disconnect a wire of "weight" from the storage battery.

Remove the air filter, the resonator with a branch pipe in gathering.

Disconnect wires of ignition and electric sockets in a following order:

Fig. 3.105. An arrangement of a socket (1) optical gauge and a clip (3) high-voltage wires (2)

- Socket of the optical gauge 1 (fig. 3.105);

- High-voltage wires 2;

- Remove a clip of 3 high-voltage wires.

Fig. 3.106. An arrangement of bolts (1) fastenings of the distributor of ignition (2) and labels () combination on the case and a casing of the distributor of ignition

Before to remove the ignition distributor, make a mark "and" (fig. 3.106) on the case and a casing of the distributor of ignition.

Turn out bolts of 1 fastening of the distributor of ignition.

Cautiously remove the ignition distributor in gathering 2.

Installation of the distributor of ignition spend to sequences, return to removal.

Tighten bolts of fastening of the distributor of ignition by the moment 10—16 Нм.