Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
4.1. Coupling
4.2. A transmission and differential
4.3. Drive shaft
4.3.1. The design description
4.3.2. Possible malfunctions of shaft of a drive and methods of their elimination
4.3.3. Removal and installation of shaft of a drive
4.3.4. Repair of the internal hinge of a shaft of a drive
4.3.5. Repair of the external hinge of a shaft of a drive
5. A running gear
6. A steering
7. Brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
11. Schemes электроборудования
 









4-3-5-remont-vneshnego-sharnira-vala-privoda.html

4.3.5. Repair of the external hinge of a shaft of a drive

Dismantling
Remove a drive shaft.

Fig. 4.144. An arrangement big (1) and small (2) collars of fastening of a protective cover of the internal hinge of a shaft of a drive




Remove big 1 (fig. 4.144) and small 2 collars of fastening of a protective cover of the SHRUS.
Remove greasing from the hinge in gathering.

Fig. 4.145. A release of a lock ring (1) and removal of the external hinge (2) in gathering from a drive shaft




Unclench a spring lock ring 1 (fig. 4.145) and remove the external hinge 2 in gathering from a drive shaft.

Fig. 4.146. Removal of the protective external hinge of a cover from a drive shaft




Remove a protective cover of the external hinge from a drive shaft (fig. 4.146).
Assemblage
Assemblage of the external hinge of a shaft of a drive spend to sequences, return to removal.

Fig. 4.147. Use of a screw-driver (1) for a release of a lock ring before installation of the external hinge (2) on a drive shaft




Screw-driver 1 (fig. 4.147) unclench a spring lock ring and in this position of a ring, establish the external hinge 2 on a drive shaft, then release a lock ring.

Fig. 4.148. Places of filling of the case of the external hinge 80—90 г the recommended greasing




Fill the case of the hinge in 80-90 grammes of the recommended greasing (fig. 4.148).

The prevention
Do not assort the external hinge. Details are picked up, they cannot be replaced separately. Inadequate repeated assemblage can adversely affect work and safety.

Fix a protective cover collars, a screw-driver, preliminary having raised internal edge of a cover for alignment of pressure of air under a cover.
Establish a power shaft on the car.



To return back
4.3.4. Repair of the internal hinge of a shaft of a drive
On the following page
5. A running gear