|
6-2-1-opisanie-konstrukcii.html
6.2.1. The design descriptionThe lopastnoj pump of the hydraulic booster of a wheel with internal перепускным the valve has the productivity providing giving in system of necessary quantity of a liquid (even on frequency of rotation of idling), for reception of demanded angular speed at steering wheel rotation. At higher frequencies of rotation of a cranked shaft the further increase in giving of a liquid in system is prevented by means of limiting pressure перепускного the valve in the valve of management by a stream. In the pump there is a tank for a liquid. The pump design provides an operating mode at which the working temperature of a liquid does not rise above 100 With, there is no noise at work of the pump and foam in a used liquid is not formed.
Specifications of the pump of the hydraulic booster of a wheel are resulted in tab. 6.2.
Table 6.2 Specifications of the hydraulic booster of a wheel
|
The name
|
The description
|
|
Liquid of the hydraulic booster of a wheel
|
DEXTRON-II, DEXTRON-III
|
|
System capacity, l
|
1,0
|
|
Pump type
|
Лопастной
|
The moments of an inhaling of the pump of the hydraulic booster of a wheel are resulted in tab. 6.3.
Table 6.3 the Moments of an inhaling of the hydraulic booster of a wheel, Нм
|
Bolt of fastening of the pump of the hydraulic booster of a wheel
|
20-24
|
|
Bolt of fastening of a forward arm of the hydraulic booster of a wheel
|
20-24
|
|
Adjusting bolt of a forward arm of the hydraulic booster of a wheel
|
18-22
|
|
The top bolt of fastening of a back arm of the hydraulic booster of a wheel
|
35-45
|
|
The bottom bolt of fastening of a back arm of the hydraulic booster of a wheel
|
20-24
|
|
Adjusting bolt of a back arm of the hydraulic booster of a wheel
|
20-24
|
|
Nut of fastening of a pulley of the pump of the hydraulic booster of a wheel
|
55-69
|
|
The union of tubes of pressure of oil of the hydraulic booster of a wheel
|
21-35
|
|