Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
6.1. System of the hydraulic booster of a wheel
6.2. The pump of the hydraulic booster of a wheel
6.3. The steering mechanism with the hydraulic booster
6.4. A steering column
6.4.1. The design description
6.4.2. Possible malfunctions of a steering column and methods of their elimination
6.4.3. Repair of a steering column and its knots
7. Brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
11. Schemes электроборудования
 









6-4-3-remont-rulevojj-kolonki-i-ee-uzlov.html

6.4.3. Repair of a steering column and its knots

Removal and steering wheel installation
Disconnect a wire of "weight" from the storage battery.
Remove a steering wheel in a following order:

Fig. 6.51. Steering wheel removal: 1 — the button of the switch of a sound signal; 2 — short moustaches of a blocking plate; 3 — a nut; 4 — a blocking plate




- Remove the button 1 (fig. 6.51) the switch of a sound signal of a steering wheel;
- Unbend short moustaches 2 blocking plates;
- Turn away a nut 3;
- Remove blocking plate 4.

Fig. 6.52. A place of drawing of labels (1) combinations on a steering wheel and the helmsman to a shaft and use of stripper DW 310—010 for steering wheel removal




- Put labels 1 (fig. 6.52) combination on a steering wheel and a steering shaft;
- Using a stripper of steering wheel DW 310—010, remove a steering wheel.

The prevention
At repair carrying out it is impossible to strike blows by a hammer to the top part of a steering shaft.

Installation
Establish a steering wheel with a blocking plate and a nut. At installation combine a steering shaft with a steering wheel according to earlier put labels.
Tighten a nut of a steering wheel the moment 23—33 Нм.
Bend short moustaches of a blocking plate.
Establish the button of the switch of a signal of a steering wheel.
Connect "a weight" wire to the storage battery.
Removal and installation of switches of turn and screen wiper
Removal
Disconnect a wire of "weight" from the storage battery.

Fig. 6.53. An arrangement of screws and a direction of removal of casings of a steering column




Turn out 4 screws and remove the bottom and top casings of a steering column (fig. 6.53).
Remove the button 1 (fig. 6.51 see) switch of a sound signal of a steering wheel.

Fig. 6.54. Directions of compression of clamps (1) for extraction of the switch of turn from the case and an arrangement of an electric socket (2) switches




Compress clamps 1 (fig. 6.54) and take the switch of turn from the case. Disconnect from the switch an electric socket 2.

Fig. 6.55. Directions of compression of clamps (1) for extraction of the switch of a screen wiper from the case and an arrangement of an electric socket (2) switches




Compress clamps 1 (fig. 6.55) and take the switch of a screen wiper from the case. Disconnect from the switch an electric socket 2.
Remove the case of switches in a following order:

Fig. 6.56. An arrangement of an electric socket (1) switches of a sound signal and screws (2) fastenings of the case of switches




- Disconnect an electric socket 1 (fig. 6.56) from the switch of a sound signal;
- Turn out 2 screws 2;
- Remove the case of switches.
Installation
Establish the case of switches and fix screws.
Connect an electric socket to the switch of a sound signal.
Establish the turn switch in the case before its accurate fixing.
Establish the screen wiper switch in the case before its accurate fixing.
Connect to switches electric sockets.
Establish casings of a steering column and fix their screws.
Connect "a weight" wire to the storage battery.
Removal and installation of the switch of ignition
Removal
Disconnect a wire of "weight" from the storage battery.
Remove a steering wheel.
Remove the ignition switch in a following order:

Fig. 6.57. An arrangement of an electric socket (1) and the screw (2) fastenings of the switch of ignition




- Disconnect from the switch an electric socket 1 (fig. 6.57);
- Turn out the screw 2;
- Remove the ignition switch.
Installation
Connect to the switch an electric socket.
Establish the switch of ignition and fix the screw.
Establish a steering wheel.
Connect "a weight" wire to the storage battery.
Repair of a steering column
Removal
Remove a steering wheel.
Remove the switch of a signal of turn and the screen wiper switch.
Remove the case of the switch of a signal of turn and the screen wiper switch.
Remove the ignition switch.
Remove a steering column in a following order:

Fig. 6.58. A place of drawing of labels (1) combinations on intermediate to a shaft and a shaft of a steering column and an arrangement of a coupling bolt (2) fastenings of an intermediate shaft and the bottom nuts (3) fastenings of a steering column




- Put labels 1 (fig. 6.58) combination on an intermediate shaft and a shaft of a steering column;
- Turn out the top coupling bolt of 2 fastenings of an intermediate shaft;
- Turn away the bottom nuts of 3 fastenings of a steering column;

Fig. 6.59. An arrangement of the top nuts (1) fastenings of a steering column




- Turn away the top nuts 1 (fig. 6.59) fastenings of a steering column;
- Reject downwards and remove a steering column.
Dismantling

The prevention
It is impossible to strike on a steering column. Plastic муфта, established for safety of the driver, can be broken.

Remove a shaft of a steering column from a steering column in a following order:

Fig. 6.60. Removal from a shaft of a steering column of a lock ring (1), washers (2), springs (3) and washers (4)




- Remove a lock ring 1 (fig. 6.60);
- Remove a washer 2;
- Remove a spring 3;
- Remove a washer 4;

Fig. 6.61. An arrangement of a clamp (1) and directions (2) removals of a shaft of a steering column




- Press a clamp 1 (fig. 6.61);
- Strongly press downwards 2 a shaft of a steering column and take it.
Assemblage

The note
Arrange the centering plug on the bottom part of a shaft of a steering column for simplification of installation of the plug in a casing of a steering column.

Establish a shaft of a steering column in a steering column in a following order:

Fig. 6.62. Installation of a clamp of blocking of the centering plug in a groove of a steering column




- Establish a clamp of blocking of the centering plug in a groove of a steering column (fig. 6.62);
- Establish a washer 4 (fig. 6.60 see);
- Establish a spring 3;
- Establish a washer 2;
- Establish a lock ring 1.
Establish a steering column on the car.
Installation
Establish a steering column, thus combine labels 1 (fig. 6.58 see) on intermediate to a shaft and a shaft of a steering column.

Fig. 6.63. An arrangement and the moments of an inhaling of a bolt (1) fastenings of an intermediate shaft and the bottom nuts (2) fastenings of a steering column




Screw the top coupling bolt 1 (fig. 6.63) fastenings of an intermediate shaft and tighten its moment 21—29 Нм.
Screw the bottom nuts of 2 fastenings of a steering column and tighten their moment 15—20 Нм.
Screw the top nuts of fastening of a steering column and tighten their moment 15—20 Нм.
Establish the ignition switch.
Establish the case of switches of a signal of turn and a screen wiper.
Establish switches of a signal of turn and a screen wiper.
Establish a steering wheel.
Connect "a weight" wire to the storage battery.
Removal and installation of an intermediate shaft
Removal
Remove an intermediate shaft in a following order:

Fig. 6.64. A place of drawing of labels (1) combinations on intermediate to a shaft and a shaft of a steering column and an arrangement top (2) and the bottom (3) coupling bolts of fastening of an intermediate shaft




- Put labels 1 (fig. 6.64) combination on an intermediate shaft and a shaft of a steering column;
- Turn out the top coupling bolt of 2 fastenings of an intermediate shaft;
- Turn out the bottom coupling bolt of 3 fastenings of an intermediate shaft;
- Remove an intermediate shaft.
Installation
Establish an intermediate shaft, thus combine labels 1 (fig. 6.64 see) on intermediate to a shaft and a shaft of a steering column.
Fix an intermediate shaft top and bottom coupling bolts, having tightened their moment 21—29 Нм.



To return back
6.4.2. Possible malfunctions of a steering column and methods of their elimination
On the following page
7. Brake system