Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
7. Brake system
7.1. The design description
7.1.1. Control lamp ВRАКЕ
7.1.2. The main brake cylinder
7.1.3. A pressure regulator
7.1.4. The gauge of level of a brake liquid
7.1.5. The vacuum amplifier of brakes
7.1.6. The disk forward brake mechanism
7.1.7. The drum-type brake mechanism
7.1.8. A lay brake
7.1.9. Possible malfunctions of brake system and methods of their elimination
7.2. Diagnostics of brake system
7.3. Removal and installation of knots of brake system
7.4. Replacement brake колодок
7.5. Repair of knots of brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
11. Schemes электроборудования


7.1.2. The main brake cylinder

The main brake cylinder is designed for use in two-planimetric brake systems. The forward brake mechanism and the back left brake mechanism are put in action by the primary piston, and the forward left brake mechanism and the back right brake mechanism are put in action by the secondary piston. The main brake cylinder unites functions of the standard double main brake cylinder, and also the indicator of low level of a brake liquid and a pressure regulator in brake system.

Replace all details included in the repair complete set, used for service of the main brake cylinder. At installation grease rubber details with a pure brake liquid for simplification of assemblage.
Do not use industrial compressed air for drying and clearing of details of the brake mechanism. It can damage rubber details.
If any detail of hydraulic system is removed or disconnected, completely pump over brake system.

The size of the moments of an inhaling is established for the dry, not greased fastening.
Carry out all repair work on the pure workbench cleared of stains of mineral oils.

To return back
7.1.1. Control lamp ВRАКЕ
On the following page
7.1.3. A pressure regulator