Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
7. Brake system
7.1. The design description
7.2. Diagnostics of brake system
7.2.1. Check of brake system
7.2.2. Check of brake hoses
7.2.3. Check of a working course of a pedal of a brake
7.2.4. Check of a free wheeling of a pedal of a brake
7.2.5. Check of work of the vacuum amplifier of brakes
7.2.6. Check of the valve of the vacuum amplifier of brakes
7.2.7. Check of lobbies brake колодок
7.2.8. Check of a brake disk
7.3. Removal and installation of knots of brake system
7.4. Replacement brake колодок
7.5. Repair of knots of brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
11. Schemes электроборудования
 









7-2-4-proverka-svobodnogo-khoda-pedali-tormoza.html

7.2.4. Check of a free wheeling of a pedal of a brake

Press a brake pedal some times at the idle engine to create in cavities of the vacuum amplifier the identical pressure close to the atmospheric.

Fig. 7.5. Change of a free wheeling of a pedal of a brake




Press a pedal of a brake prior to the beginning of notable resistance and measure distance which there has taken place a brake pedal (fig. 7.5). The Free wheeling of a pedal of a brake should be in limits of 6-10 mm.
The free wheeling of a pedal of a brake cannot be adjusted.




To return back
7.2.3. Check of a working course of a pedal of a brake
On the following page
7.2.5. Check of work of the vacuum amplifier of brakes