Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
7. Brake system
7.1. The design description
7.2. Diagnostics of brake system
7.3. Removal and installation of knots of brake system
7.3.1. Brake hoses
7.3.2. The stoplight switch
7.3.3. A brake pedal
7.3.4. The main brake cylinder
7.3.5. A tank of a brake liquid
7.3.6. A pressure regulator
7.3.7. The gauge of level of a brake liquid
7.3.8. The vacuum amplifier and its hose
7.3.9. A support of a forward brake
7.3.10. A brake disk
7.3.11. A drum of the back brake mechanism
7.3.12. The wheel brake cylinder of the back brake mechanism
7.3.13. A protective casing of a back brake
7.3.14. The lever of a lay brake
7.3.15. A cable of a lay brake
7.4. Replacement brake колодок
7.5. Repair of knots of brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
11. Schemes электроборудования
 









7-3-14-rychag-stoyanochnogo-tormoza.html

7.3.14. The lever of a lay brake

Removal

Fig. 7.34. The lever and a cable of a lay brake: 1 — a clip of a cable of a lay brake; 2 — a cable of a lay brake; 3 — fastening; 4 — a cable sealant; 5 — the lever of a lay brake in gathering; 6 — the switch of control lamp BRAKE; 7 — шплинт; 8 — a cable pulley; 9 — a finger




The lever and a cable of a lay brake are shown on fig. 7.34.
Remove a casing of the lever of a lay brake.
Remove a casing of a cable of a lay brake.
Remove the lever of a lay brake in a following order:

Fig. 7.35. An arrangement of an electric socket (1) and the screw (2) fastenings of the switch of control lamp BRAKE




- Disconnect an electric socket from the switch 1 (fig. 7.35) control lamp BRAKE;
- Turn out the screw of 2 fastenings of the switch of control lamp BRAKE. The screw of fastening of switch BRAKE should be removed together with the lever;

Fig. 7.36. An arrangement of a bolt (1) and nuts (2) fastenings of the lever of a lay brake




- Turn out bolts 1 (fig. 7.36);
- Turn away a nut 2;

Fig. 7.37. An arrangement шплинта (1) fixings of a finger (2) fastenings of a pulley of a cable of a lay brake




- Remove шплинт 1 (fig. 7.37);
- Remove a finger 2.
Installation
Installation of the lever of a lay brake spend to sequences, return to removal.




To return back
7.3.13. A protective casing of a back brake
On the following page
7.3.15. A cable of a lay brake