Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
7. Brake system
7.1. The design description
7.2. Diagnostics of brake system
7.3. Removal and installation of knots of brake system
7.3.1. Brake hoses
7.3.2. The stoplight switch
7.3.3. A brake pedal
7.3.4. The main brake cylinder
7.3.5. A tank of a brake liquid
7.3.6. A pressure regulator
7.3.7. The gauge of level of a brake liquid
7.3.8. The vacuum amplifier and its hose
7.3.9. A support of a forward brake
7.3.10. A brake disk
7.3.11. A drum of the back brake mechanism
7.3.12. The wheel brake cylinder of the back brake mechanism
7.3.13. A protective casing of a back brake
7.3.14. The lever of a lay brake
7.3.15. A cable of a lay brake
7.4. Replacement brake колодок
7.5. Repair of knots of brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
11. Schemes электроборудования
 









7-3-15-tros-stoyanochnogo-tormoza.html

7.3.15. A cable of a lay brake

Removal
Remove the lever of a lay brake.
Remove a cable of a lay brake in a following order:

Fig. 7.38. Removal of a pulley of a cable (1) both fastenings (3) and an arrangement of an adjusting nut (2)




- Remove a pulley of a cable 1 (fig. 7.38);
- ослабьте an adjusting nut 2;
- Remove fastening 3;

Fig. 7.39. Removal of a sealant (1) cables of a lay brake




- Remove a sealant 1 (fig. 7.39).
Remove the back drum-type brake mechanism.

Fig. 7.40. An arrangement of a clip (1) fastenings of a cable to a protective casing of a back brake and fastening of a cable (2) to back brake колодке




Remove a clip 1 (fig. 7.40) from a protective casing of a back brake and disconnect a cable of a lay brake 2 from back brake колодки.
Remove a cable of a lay brake in a following order:

Fig. 7.41. An arrangement of a bolt (1) fastenings of the right branch of a cable of a lay brake




- Turn out tightening bolts 1 (fig. 7.41), крепящие the right branch of a cable of a lay brake;
- Remove the fuel filter;

Fig. 7.42. An arrangement of a bolt (1) fastenings of the left branch of a cable of a lay brake




- Turn out tightening bolts 1 (fig. 7.42), крепящие the left branch of a cable of a lay brake;
- Remove a cable of a lay brake from the car.
Installation
Establish the fuel filter.
Establish a cable of a lay brake and fix tightening bolts, having tightened their moment 10 Нм.
Connect a cable of a lay brake to the back brake mechanism.
Establish the back brake mechanism.
Establish a sealant and cable fastening.
Establish a cable pulley, having adjusted length an adjusting nut. Tighten an adjusting nut the moment 10 Нм.
Establish the lever of a lay brake.



To return back
7.3.14. The lever of a lay brake
On the following page
7.4. Replacement brake колодок