> The stoplight switch. Daewoo Matiz (since 1997 of release)
Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
7. Brake system
7.1. The design description
7.2. Diagnostics of brake system
7.3. Removal and installation of knots of brake system
7.3.1. Brake hoses
7.3.2. The stoplight switch
7.3.3. A brake pedal
7.3.4. The main brake cylinder
7.3.5. A tank of a brake liquid
7.3.6. A pressure regulator
7.3.7. The gauge of level of a brake liquid
7.3.8. The vacuum amplifier and its hose
7.3.9. A support of a forward brake
7.3.10. A brake disk
7.3.11. A drum of the back brake mechanism
7.3.12. The wheel brake cylinder of the back brake mechanism
7.3.13. A protective casing of a back brake
7.3.14. The lever of a lay brake
7.3.15. A cable of a lay brake
7.4. Replacement brake колодок
7.5. Repair of knots of brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
11. Schemes электроборудования
 







7-3-2-vyklyuchatel-stop-signala.html

7.3.2. The stoplight switch

Check up that stoplights light up by pressing of a pedal of a brake, and at отпускании — die away. Otherwise check up integrity of a safety lock in an electric chain of the switch. If the safety lock is serviceable, adjust switch position.
If stoplights still do not light up, check up pressure giving to the switch or an electric chain between the switch and stoplight lanterns. Check up serviceability of lamps of a stoplight.
Removal
Disconnect a wire of "weight" from the storage battery.
Remove the stoplight switch in a following order:

Fig. 7.11. An arrangement of an electric socket (1) and a stoplight (2)




- Disconnect an electric socket 1 (fig. 7.11);
- Turn the switch of a stoplight 2 and remove it from an arm.
Installation
Establish the stoplight switch.
Connect an electric socket.
Connect "a weight" wire to the storage battery.



«To return back
7.3.1. Brake hoses
On the following page»
7.3.3. A brake pedal