> Brake pedal. Daewoo Matiz (since 1997 of release)
Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
7. Brake system
7.1. The design description
7.2. Diagnostics of brake system
7.3. Removal and installation of knots of brake system
7.3.1. Brake hoses
7.3.2. The stoplight switch
7.3.3. A brake pedal
7.3.4. The main brake cylinder
7.3.5. A tank of a brake liquid
7.3.6. A pressure regulator
7.3.7. The gauge of level of a brake liquid
7.3.8. The vacuum amplifier and its hose
7.3.9. A support of a forward brake
7.3.10. A brake disk
7.3.11. A drum of the back brake mechanism
7.3.12. The wheel brake cylinder of the back brake mechanism
7.3.13. A protective casing of a back brake
7.3.14. The lever of a lay brake
7.3.15. A cable of a lay brake
7.4. Replacement brake колодок
7.5. Repair of knots of brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
11. Schemes электроборудования
 







7-3-3-pedal-tormoza.html

7.3.3. A brake pedal

Removal
Disconnect a wire of "weight" from the storage battery.
Remove the stoplight switch.
Disconnect a pedal of a brake from the vacuum amplifier of brakes.
Remove a brake pedal in a following order:

Fig. 7.12. An arrangement of a bolt (1) fastenings of a pedal of a brake




- Turn out a bolt 1 (fig. 7.12);

Fig. 7.13. Details of fastening of a pedal of a brake: 1 — a spring; 2 — the plug; 3 — a basic pillow; 4 — an overlay of a pedal of a brake




- Remove a spring 1 (fig. 7.13) brake pedals;
- Remove the plug 2;
- Remove a basic pillow 3;
- Remove an overlay of a pedal of a brake 4.
Installation
Establish an overlay of a pedal of a brake.
Establish a spring of a pedal of a brake, the plug and a basic pillow.
Connect a brake pedal to the vacuum amplifier of brakes.
Tighten a bolt of fastening of a pedal of a brake to an arm the moment 18 Нм.
Establish the switch of a lantern of a stoplight.
Connect "a weight" wire to the storage battery.




To return back
7.3.2. The stoplight switch
On the following page
7.3.4. The main brake cylinder