Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
7. Brake system
7.1. The design description
7.2. Diagnostics of brake system
7.3. Removal and installation of knots of brake system
7.3.1. Brake hoses
7.3.2. The stoplight switch
7.3.3. A brake pedal
7.3.4. The main brake cylinder
7.3.5. A tank of a brake liquid
7.3.6. A pressure regulator
7.3.7. The gauge of level of a brake liquid
7.3.8. The vacuum amplifier and its hose
7.3.9. A support of a forward brake
7.3.10. A brake disk
7.3.11. A drum of the back brake mechanism
7.3.12. The wheel brake cylinder of the back brake mechanism
7.3.13. A protective casing of a back brake
7.3.14. The lever of a lay brake
7.3.15. A cable of a lay brake
7.4. Replacement brake колодок
7.5. Repair of knots of brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
11. Schemes электроборудования
 









7-3-5-bachok-tormoznojj-zhidkosti.html

7.3.5. A tank of a brake liquid

Removal
Disconnect an electric socket of the gauge of level of a brake liquid.
Remove a tank of a brake liquid in a following order:
- Using a syringe, pump out from a tank a brake liquid;

Fig. 7.16. An arrangement of the screw (1) and use of a screw-driver (2) with a flat edge for tank removal




- Turn out the screw 1 (fig. 7.16);
- Screw-driver 2 with a flat edge, remove a tank. For prevention of damage of a tank at removal do not make it the big effort.
Installation
Establish a tank and fix its screw. Tighten the screw the moment 4 Нм.
Connect an electric socket of the gauge of level of a brake liquid.
Add a brake liquid.
Pump over brake system.



To return back
7.3.4. The main brake cylinder
On the following page
7.3.6. A pressure regulator