Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
7. Brake system
7.1. The design description
7.2. Diagnostics of brake system
7.3. Removal and installation of knots of brake system
7.4. Replacement brake колодок
7.5. Repair of knots of brake system
7.5.1. The main brake cylinder
7.5.2. A support of a forward brake
7.5.3. The wheel brake cylinder of the back brake mechanism
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
11. Schemes электроборудования
 









7-5-1-glavnyjj-tormoznojj-cilindr.html

7.5.1. The main brake cylinder

Dismantling
Remove the main brake cylinder.

Fig. 7.51. The main brake cylinder: 1 — a tank sealant; 2 — a washer; 3 — a lock finger




Remove a sealant of a tank 1 (fig. 7.51).
Remove a washer 2.
Remove a lock finger 3.

Fig. 7.52. Details of the main brake cylinder: 1 — a cap; 2 — a lock ring; 3 — the primary piston; 4 — the secondary piston and a spring




Remove a cap 1 (fig. 7.52).
Remove a lock ring 2. At removal of a lock ring, avoid damage of the piston or cylinder walls.
Remove the primary piston 3.
Cautiously remove the secondary piston and a spring 4 from the main brake cylinder.
Assemblage
Establish the secondary piston in gathering.
Establish a lock finger.
Establish the primary piston.
Establish a lock ring.
Establish a cap.
Establish a washer.
Establish a tank sealant.
Establish the main brake cylinder.



To return back
7.5. Repair of knots of brake system
On the following page
7.5.2. A support of a forward brake