4-3-5-remont-vneshnego-sharnira-vala-privoda.html
4.3.5. Repair of the external hinge of a shaft of a driveDismantling
Remove a drive shaft.
|
Fig. 4.144. An arrangement big (1) and small (2) collars of fastening of a protective cover of the internal hinge of a shaft of a drive
|
Remove big 1 ( fig. 4.144) and small 2 collars of fastening of a protective cover of the SHRUS.
Remove greasing from the hinge in gathering.
|
Fig. 4.145. A release of a lock ring (1) and removal of the external hinge (2) in gathering from a drive shaft
|
Unclench a spring lock ring 1 ( fig. 4.145) and remove the external hinge 2 in gathering from a drive shaft.
|
Fig. 4.146. Removal of the protective external hinge of a cover from a drive shaft
|
Remove a protective cover of the external hinge from a drive shaft ( fig. 4.146).
Assemblage
Assemblage of the external hinge of a shaft of a drive spend to sequences, return to removal.
|
Fig. 4.147. Use of a screw-driver (1) for a release of a lock ring before installation of the external hinge (2) on a drive shaft
|
Screw-driver 1 ( fig. 4.147) unclench a spring lock ring and in this position of a ring, establish the external hinge 2 on a drive shaft, then release a lock ring.
|
Fig. 4.148. Places of filling of the case of the external hinge 80—90 г the recommended greasing
|
Fill the case of the hinge in 80-90 grammes of the recommended greasing ( fig. 4.148).
The prevention
Do not assort the external hinge. Details are picked up, they cannot be replaced separately. Inadequate repeated assemblage can adversely affect work and safety.
|
Fix a protective cover collars, a screw-driver, preliminary having raised internal edge of a cover for alignment of pressure of air under a cover.
Establish a power shaft on the car.
|