Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
7. Brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
10.1. An interior
10.2. Seats
10.3. Glasses and mirrors
10.4. Elements of external furnish of a body
10.5. Bumpers
10.6. Doors
10.7. A roof
10.8. Seat belts
10.9. A forward part of a body
10.10. A back part of a body
10.11. A frame and a body skeleton
10.12. Restoration of tightness and elimination of scratches of a body
10.12.1. Tightness diagnostics
10.12.2. The general test
10.12.3. Local test (a stain method)
10.12.4. Test by a water stream
10.12.5. Tightness restoration
10.12.6. Elimination негерметичности glasses
10.12.7. Diagnostics of noise, a scratch and jingle
10.12.8. Elimination of noise, a scratch and jingle
11. Schemes электроборудования
 









10-12-2-obshhee-ispytanie.html

10.12.2. The general test

Fig. 10.140. Elements of the water stand of check of tightness of a body: 1 — a pipe of 1/2 inches in length of 600 mm; 2 — распылительная an atomizer #1/2 GG—25 or 1600 mm similar by height from a floor; 3 — муфта 1/2 inches; 4 — a connector T-shaped 1/2 of inch on 1/2 inches on 1/4 inches (only right); 5 — муфта 1/2 inches (only left); 6 — крестовина 1/2 inches (only left); 7 — a tee of 1/2 inches (only left); 8 — the union of 1/2 inches (only left); 9 — муфта nested for a hose of 5/8 inches; 10 — an inlet hose of 5/8 inches in length of 600 mm (only right); 11 — a carving branch pipe of 1/2 inches; 12 — крестовина 1/2 inches with a cap; 13 — the union of 1/2 inches on 1/2 inches; 14 — a cap of 1/2 inches; 15 — муфта nested for a hose of 5/8 inches; 16 — connecting hoses of 5/8 inches in length of 3600 mm; 17 — quickly connected шланговое connection of 5/8 inches; 18 — the union of 1/2 inches; 19 — a tube of 1/2 inches in length of 750 mm; 20 — a manometre of 1/4 inches (only right)




Conduct test for tightness the water stand (fig. 10.140, 10.141). Atomizers for water delivery should settle down at height of 1600 mm from a floor. Water should move under the pressure of 155 кПа and productivity of 14 l/minutes If local pressure of water does not correspond 155 кПа, move both stands more close to the car, that a water stream нахлестывалась.

Fig. 10.141. An arrangement of the water stand of check of tightness on the car parties




Fig. 10.142. Check of tightness of a windscreen and a forward rack, an average rack, back glass and a luggage carrier door




At check of tightness of a windscreen and a forward rack a stream direct approximately on 30 downwards and on 45 in a direction to a back part of the car and on a windscreen corner (fig. 10.142).
At check of tightness of an average rack a stream direct approximately on 30 downwards and on 45 in a direction to a back part of the car and on the centre of a back door.
At check of tightness of back glass and a door of a luggage carrier a stream direct approximately on 30 downwards and on 45 in a direction to a forward part of the car and approximately on 610 mm from a corner of back glass.



To return back
10.12.1. Tightness diagnostics
On the following page
10.12.3. Local test (a stain method)