3-2-6-radiator.html
3.2.6. A radiatorRemoval
Disconnect a wire of "weight" from the storage battery.
Disconnect the bottom hose of a radiator and merge cooling liquid from cooling system.
|
Fig. 3.85. Places of fastening of the top hose of a radiator (1) and a hose of a broad tank (2)
|
Ослабьте a collar of the top hose of a radiator 1 ( fig. 3.85) also disconnect it.
Ослабьте a collar of a hose of a broad tank 2 also disconnect it.
Remove a radiator in a following order:
|
Fig. 3.86. An arrangement of bolts (1), arms (2) fastenings and a direction of removal of a radiator (3)
|
- Remove arms of 2 fastenings of a radiator;
- Remove a radiator 3.
Check up a radiator on absence of breakage, a contamination or other damages.
After plum of a cooling liquid from a radiator, in a radiator there is a liquid part. Merge the liquid rests in special capacity.
Installation
Establish a radiator and fix bolts of fastenings and arms. Tighten bolts of fastening of arms the moment 3,5—4,5 Нм.
Connect the top hose 1 ( fig. 3.85 see ) radiator to a radiator.
Connect a hose 2 broad tanks to a radiator.
Fix each hose a collar.
Fill in cooling liquid in cooling system.
Connect "a weight" wire to the storage battery.
|