> Control lamp ВRАКЕ. Daewoo Matiz (since 1997 of release)
Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
7. Brake system
7.1. The design description
7.1.1. Control lamp ВRАКЕ
7.1.2. The main brake cylinder
7.1.3. A pressure regulator
7.1.4. The gauge of level of a brake liquid
7.1.5. The vacuum amplifier of brakes
7.1.6. The disk forward brake mechanism
7.1.7. The drum-type brake mechanism
7.1.8. A lay brake
7.1.9. Possible malfunctions of brake system and methods of their elimination
7.2. Diagnostics of brake system
7.3. Removal and installation of knots of brake system
7.4. Replacement brake колодок
7.5. Repair of knots of brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
11. Schemes электроборудования


7.1.1. Control lamp ВRАКЕ

Fig. 7.2. An arrangement of control lamp ВRАКЕ on the panel of devices

In brake system the control lamp ВRАКЕ located in the panel of devices (fig. 7.2) is used. At position of III switch of ignition control lamp ВRАКЕ should light up. ВRАКЕ dies away, when the ignition switch comes back in position II. ВRАКЕ lights up:
- At a tightening of a lay brake at the ignition switch in position II;
- At low level of a brake liquid in a tank of the main brake cylinder.

«To return back
7.1. The design description
On the following page»
7.1.2. The main brake cylinder