3.1.10. The oil pump
Disconnect a wire of "weight" from the storage battery.
Remove a gear belt
and натяжитель a
Fig. 3.23. A reversing of a bolt (1) fastenings of a pulley (2) camshafts
Turn out a bolt 1 (fig. 3.23
) and remove a pulley 2 camshafts.
Fig. 3.24. An arrangement of bolts (1) fastenings of a back casing (2) gear belts
Turn out bolts 1 (fig. 3.24
) and remove a back casing of a gear belt.
Turn out bolts and remove маслоприемный a branch pipe together with an epiploon.
Fig. 3.25. Removal of a pulley (1) from a cranked shaft and an arrangement of bolts of fastening of the oil pump (2) and an arm of the compressor of the conditioner (3)
Remove a pulley 1 (fig. 3.25
) a cranked shaft from a cranked shaft.
Turn out bolts of 2 fastenings of the oil pump.
Turn out a bolt 3 and remove an arm of the compressor of the conditioner.
Remove the oil pump.
Clean the oil pump and a surface of imposing of a lining.
Remove an oil epiploon from the oil pump.
Check up an oil epiploon on absence of damages.
Installation spend to sequences, return to removal, taking into account the following.
Establish a new lining of the oil pump. If the forward epiploon of a cranked shaft is damaged, replace its new. At installation of a forward oil epiploon of a cranked shaft in the oil pump, epiploon dredging should be directed to a contacted surface of the oil pump with an epiploon.
Establish маслоприемный a branch pipe and fix bolts, having tightened their moment 9—12 Н·м.
Establish the oil pump and fix bolts, having tightened their moment 9—12 Н·м.
Establish a back casing of a gear belt and fix bolts, having tightened their moment 9—12 Н·м.
Establish a pulley of a camshaft and fix a bolt, having tightened its moment 50—60 Н·м.