Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
3.1. A mechanical part of the engine
3.1.1. The design description
3.1.2. Possible malfunctions of the engine and methods of their elimination
3.1.3. Diagnostics
3.1.4. The air filter in gathering
3.1.5. A hose and the ventilation valve картера
3.1.6. An inlet collector
3.1.7. A final collector
3.1.8. A gear belt
3.1.9. The oil pallet
3.1.10. The oil pump
3.1.11. A head of the block of cylinders
3.1.12. An engine mount pillow
3.1.13. A forward pillow of an engine mount
3.1.14. Removal and engine installation
3.1.15. Repair of a head of the block of cylinders
3.1.16. The block of cylinders, a cranked shaft, pistons and rods
3.2. Cooling system
3.3. An electric equipment
3.4. A control system of the engine
3.5. System of release of the fulfilled gases
4. Transmission
5. A running gear
6. A steering
7. Brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
11. Schemes электроборудования
 









3-1-4-vozdushnyjj-filtr-v-sbore.html

3.1.4. The air filter in gathering

Fig. 3.7. The air filter and inlet and final collectors: 1 — an inlet collector; 2 — a pipe рециркуляции exhaust gases; 3 — the valve and the system solenoid рециркуляции exhaust gases; 4 — throttle knot; 5 — the case of the air filter; 6 — the resonator; 7 — a branch pipe; 8 — the oxygen gauge; 9 — a final collector; 10 — a protective casing of a final collector




The air filter, and also inlet and final collectors are shown on fig. 3.7.

Fig. 3.4. An arrangement of a collar of fastening of an inlet air branch pipe




Disconnect a wire of "weight" from the storage battery. Remove a collar 1 (fig. 3.4) and disconnect an inlet air branch pipe from the case of the air filter.
Disconnect an electric socket from the case of the air filter.
Remove the case of the air filter, the resonator and an air branch pipe in gathering in a following order:

Fig. 3.5. Elements of fastening of the case of the air filter: 1 — a bolt; 2 — bolts, 7—9 Нм; 3 — the air filter in gathering; and — an arm




- Turn out a bolt 1 (fig. 3.5) fastenings of an air branch pipe;
- Turn out bolts 2 and remove the top part of the case of the air filter together with the gauge of temperature of let in air and inlet - an air branch pipe;
- Remove the case of the air filter.

Fig. 3.6. An arrangement of clamps (and and b) fastenings of a pipe (1) and the resonator (2) to the case of the air filter




Remove a pipe 1 (fig. 3.6) from the resonator, pressing a clamp and.
Remove the resonator 2 from the air cleaner case, pressing a clamp b.
Installation of the air filter in gathering spend to sequences, return to removal, taking into account the following.
Tighten bolts the moment 7—9 Нм.




To return back
3.1.3. Diagnostics
On the following page
3.1.5. A hose and the ventilation valve картера