> The oil pallet. Daewoo Matiz (since 1997 of release)
Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
3.1. A mechanical part of the engine
3.1.1. The design description
3.1.2. Possible malfunctions of the engine and methods of their elimination
3.1.3. Diagnostics
3.1.4. The air filter in gathering
3.1.5. A hose and the ventilation valve картера
3.1.6. An inlet collector
3.1.7. A final collector
3.1.8. A gear belt
3.1.9. The oil pallet
3.1.10. The oil pump
3.1.11. A head of the block of cylinders
3.1.12. An engine mount pillow
3.1.13. A forward pillow of an engine mount
3.1.14. Removal and engine installation
3.1.15. Repair of a head of the block of cylinders
3.1.16. The block of cylinders, a cranked shaft, pistons and rods
3.2. Cooling system
3.3. An electric equipment
3.4. A control system of the engine
3.5. System of release of the fulfilled gases
4. Transmission
5. A running gear
6. A steering
7. Brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
11. Schemes электроборудования


3.1.9. The oil pallet

Merge engine oil from картера the engine.
Turn away a nut, disconnect a reception exhaust pipe from a final collector and remove a lining.

Fig. 3.21. An arrangement of bolts (1) fastenings of the bottom plate (2) couplings

Turn out bolts 1 (fig. 3.21) and remove the bottom plate of 2 couplings.

Fig. 3.22. An arrangement of bolts and nuts (1) fastenings of the oil pallet (2)

Turn out bolts and nuts 1 (fig. 3.22 see) and remove the oil pallet 2 from the block of cylinders.
Clear the oil pallet and a condensed surface.
Clear bolts of the oil pallet.
Clear apertures for bolts in the block of cylinders.
Installation of the oil pallet spend to sequences, return to removal, taking into account the following.
Establish the oil pallet during 5 mines after drawing of a layer liquid прокладочной mastic (hermetic).
Tighten bolts and nuts of fastening of the oil pallet the moment 9—12 Нм.
Tighten bolts of fastening of the bottom plate картера couplings by the moment 4—7 Нм.
Tighten nuts of fastening of a reception exhaust pipe the moment 25—35 Нм.

To return back
3.1.8. A gear belt
On the following page
3.1.10. The oil pump