Daewoo Matiz since 1997 of release
1. The general data
2. Maintenance service
3. The engine
4. Transmission
5. A running gear
6. A steering
7. Brake system
7.1. The design description
7.2. Diagnostics of brake system
7.3. Removal and installation of knots of brake system
7.3.1. Brake hoses
7.3.2. The stoplight switch
7.3.3. A brake pedal
7.3.4. The main brake cylinder
7.3.5. A tank of a brake liquid
7.3.6. A pressure regulator
7.3.7. The gauge of level of a brake liquid
7.3.8. The vacuum amplifier and its hose
7.3.9. A support of a forward brake
7.3.10. A brake disk
7.3.11. A drum of the back brake mechanism
7.3.12. The wheel brake cylinder of the back brake mechanism
7.3.13. A protective casing of a back brake
7.3.14. The lever of a lay brake
7.3.15. A cable of a lay brake
7.4. Replacement brake колодок
7.5. Repair of knots of brake system
8. Systems of heating, ventilation and air-conditioning
9. A body electric equipment
10. A body
11. Schemes электроборудования
 









7-3-6-regulyator-davleniya.html

7.3.6. A pressure regulator

Removal
Remove a pressure regulator in a following order:

Fig. 7.17. An arrangement of unions (1) fastenings of tubes to a pressure regulator




- Turn away unions 1 (fig. 7.17) the tubes connected to a regulator of pressure;

Fig. 7.18. An arrangement of a nut (1) fastenings of a regulator of pressure (2)




- Turn away a nut 1 (fig. 7.18) fastenings of a regulator of pressure;
- Remove a regulator of pressure 2;
- Stoppers close opened apertures of a regulator for prevention of leak of a liquid or its pollution.

The prevention
The brake liquid dissolves a paint and plastic. Therefore at liquid hit on a paint and varnish covering of the car wash out its considerable quantity of water.

Installation
Establish a regulator of pressure and fix a nut, having tightened its moment 16 Нм.
Connect to a regulator of pressure of a tube and tighten unions the moment 16 Нм.



To return back
7.3.5. A tank of a brake liquid
On the following page
7.3.7. The gauge of level of a brake liquid